Ride-On PST will eliminate 85-95% of your flats in tubeless tire from object up to 1/4 "(1/8"for tube tires ) that penetrate the contact area of yours tire.Ride-One's efficiency in tube tires is reduced to 55-56% since puncturing objects often tear the tube.It is impossible for a tire sealant to seal a tear .It is vital to remove the puncturing object immediately from a tire containing a tube to prevent futther damage that can result in tearing the tube.
close

Our company takes the position that any repair in a motorcycle tire should be treated as a temporary repair.We recommend that as soon as possible after finding an object in your tire,you have the tire inspected by a professional.If the recommendationis for fixing the puncture or replacing the tire,then you should do so .Ride-On will not interfere with the application of conventional tire plug and patch repairs, and can easily be washed out of tires with water.
close

Inspect yours tires regularly for perforating objects or other damage.Look forand remove any stones,bits of glass,metal or other foreign objects wedged in the tread -these may work their way deeper into the tire and eventually cause a puncture.Also check yours tires closely for singns of uneven were patterns uneven were patterns.Uneven were may be caused by improper inflation,misalignment,tire imbalance,or damaged suspension parts If the cause of the uneven wers is not corrected,further tire damage will occur.Certain uneven were patternal may also indicate that the tire has suffered internal or structural damage:such damage requires immediate attention from a professional tire care specialist.

If you notice that an object has punctured yours tire tread,drive yours bike for 5-8 kms to warm up the tires.Remove the puncturing object and immediately drive yours motorcycle for 3-5 kms ,so that Ride-On can works its way into and seal the puncture .Although Ride-On is effective from -50c to 400c,please note that it work best once yours tires have warmed up.For maximum safety,have a tire professional inspect (and if necessary, repair or replace) yours tire as soon as possible after a puncture .Ride-On will not interfere with the application of conventional tire plug and patch repairs,and can easily be washed out to tires with water.You may be wondering why you need to remove puncturing objects from yours tire tread,given that Ride-On froms an effective seal around such objects.The reason is that if an object is left in the tire,it will shift as the tire rotates eventually creating a larger hole and causing further damage to the tire or tube.Please note that if an object has been in the tire for a long time,it may take some time for the puncturing cavity to close.(This is because rubber has "memory" ,which causes it to confrom to the shape of the puncturing object)In this case,the tire may temporarily lose some air until it is sealed .Note also that if the puncturing object is a screw,you must unscrew it-yanking or pulling the screw will tear the rubber and possibly the steel belta.
close

The product manufactured by our leading competitor was originally designed for use in bicycle tires ,and according to their website is "not intended for speeds in excess of 120 kmph".Ride-On is designed to actually help hydrodynamically banlanced tire,It at highway speeds.Once installed in a tire ,It will actually act to dampen vibrations for the life of a tire so you do not need periodic rebalancing .Although we don't condone speeding,our dealeras and custommers comment that their bikes actually run smoother at speeds as high as 240 kmph.Ride-On should be installed in tires and wheels that have been professionally mounted and balanced.Once installed,you should not try to rebalanced a tire containing Ride-On-just let it do what it is was forrulated to do!
close

Ride-On is drsigned to be non-hazardous and non-flammable,and contains corrosion inhibitors that protect all alloys of steel,aluminum,magnesium,and yellow metals against oxidation.Although some of our competitors'products have been documented as causing corrosion,Ride-On enjoy a reputation for being completely compatible with all types wheels and tires.Ride-On is currently sold by six of the nation's ten largest commercial tire dealers.They install our products into the tires of their commercial customers,who demand that the products not harm their aluminum or steel wheels.As their tires can last upwards of 400,000 kms,the fact that Ride-On is designed to not harm tire ply materials or cuse loss of adhesion strength helps those customers retain tires for the fullest life possible Letters from manufacturers such as Michelin,Goodyear,Bridgestone/Firestone,Continental,Yokohame,and Toyo that indicate that the use of our products do not automatically void theri warranties also bears witness to our success in creating a product that does not cause harm to tires or wheels.
close